Important THINKWARE Dashcam Hardwiring Info..(Wire colours etc)

A number of Dashcam manufacturers have changed the wiring colours for their hardwire cable. Originally the wiring was:

RED  – Permanent Power Supply
YELLOW – Ignition Switched Power Supply

However since the start of May 2016 they are now:

 YELLOW – Permanent Power Supply
 RED – Ignition Switched Power Supply

We are in a bit of a changeover time at present with a mixture of each however either way the black labels on the cables are labelled correctly so please check before connecting.

The common problem with incorrect wiring is the Parking Mode of the THINKWARE Camera will not work.

This entry was posted in Technical, Thinkware Dash Cams and tagged , , , , , , , . Bookmark the permalink.

4 Responses to Important THINKWARE Dashcam Hardwiring Info..(Wire colours etc)

  1. Damo says:

    Dear Sir/Madam,

    I have just received my new F800 PRO and I am am just looking to install it into the car.

    Can You please confirm that the new hard wiring scheme is:-

    YELLOW – (BATTERY written on wire) – is Permanent Power Supply
    RED – (ACC written on wire) – is Ignition Switched Power Supply

    It may help to update the website with the wire labels ( BAT & ACC ) for the not so tech savvy people lol.

    Many thanks
    Damo

  2. Kul says:

    Hi folks,
    ok that explains alot, thanks.
    However, on the red cable is a fuse and label says ‘Const Cable…’ is this a mistake also?

    • That would lead you top believe that the red is constant live? Is that definitely a Thinkware Hardwire loom as i’ve only ever seen them say ‘Battery’ (Permanent) and ‘ACC’ (Ignition).

      Worst case you can power one way around and see if Parking Mode works, if it does it’s wired correctly, if it doesn’t you’re not! (As long as it’s enabled in the settings)

Leave a Reply

Your email address will not be published. Required fields are marked *